The troublesome thing is that the jaw plate of the jaw crusher wears too fast. We have to replace the jaw plate of the jaw crusher regularly. In order to help you solve this trouble as soon as possible, we will teach you some ways to protect the jaw plate of the jaw crusher. This is an effective method that allows you to avoid frequently replacing the jaw plates of the jaw crusher.
The strength and wear resistance of the jaw plate are not good, and the resistance performance is not good. The method to solve the wear of the jaw plate of the jaw crusher: the newly installed jaw plate must be fixed tightly, installed well, and in smooth contact with the surface of the machine. A layer of material with better plasticity can be placed between the jaw plate and the surface of the machine. Every batch of materials entering the crusher must be randomly inspected. Once the properties of the materials change significantly, the parameters of the crusher must be changed in time to match the incoming materials. The jaw plate must be made of materials with high hardness, wear resistance and strong resistance. Cement companies with mine crushing production line technology can interchange the worn jaw plates of mine coarse crushing and cement fine crushing. The worn jaw plate can be repaired by surfacing welding. Furthermore, please pay attention during the working process: Feeding can only start after the crusher is in normal operation. Crushed materials should be evenly added into the crushing cavity, and side feeding or full filling should be avoided to prevent one side from being overloaded or overloaded; under normal circumstances, the temperature rise of the bearings does not exceed 35°C, and the temperature does not exceed 70°C. If it exceeds When the temperature reaches 70°C, the machine should be stopped immediately and the cause should be identified and eliminated. Before shutting down, the feeding work should be stopped first, and the motor can be turned off only after the crushed materials in the crushing cavity are completely discharged. During crushing, if the machine stops due to material obstruction in the crushing cavity, the motor should be shut down immediately and the material must be removed before it can be started again. After one end of the tooth plate is worn, it can be turned around for use.
Shanvim as a global supplier of crusher wearing parts, we manufacture cone crusher wearing parts for different brands of crushers. We have more than 20 years of history in the field of CRUSHER WEAR PARTS. Since 2010, we have exported to America, Europe, Africa and other countries in the world.
Post time: Sep-20-2023