During the working process of the mobile crusher, blockage is a relatively common problem. The blockage lasts for a long time, which will damage the performance of the crusher on the one hand, and reduce the production efficiency of the crusher on the other hand. In order to solve this problem. The problem needs to be found first, what is the cause?
1. Material problem
The nature of the produced stone not only affects the selection of crushing equipment, but also affects the production efficiency of the crusher. For example, stones with high hardness and high humidity often need to be broken for a longer time to meet the discharge requirements. If the special material is also fed at the normal feeding speed, it is easy to cause the mobile crusher to have a material blocking problem.
2. Feeding too fast
When the mobile crusher is in production, it is required to feed at a uniform speed, neither too fast nor too slow. If it is too fast, the material will be blocked when it enters the machine cavity and is not broken in time. In order to avoid this situation, it is generally necessary to configure a vibrating feeder. Feeder to achieve uniform feeding.
3. The voltage is unstable or too low
The motor of the mobile crusher needs a certain voltage to work normally. If the voltage is unstable or too low, although the motor can rotate, the power generated by it is not enough to crush the materials in the crushing cavity, and then it will A large amount of material is blocked in the crushing cavity, affecting production.
4. Inappropriate tension of the V-belt
In the production process of the mobile crusher, the power is transmitted to the sheave by the V-belt to crush the stone. When the V-belt is loose, it will cause slippage. As the sheave rotates instead of driving the sheave, the material cannot be affected normally. The crushing force cannot be crushed in the crushing cavity, and then the phenomenon of material blocking occurs.
5. Equipment problems
There are also great differences in the quality of mobile crushers produced by different manufacturers. If the blockage problem occurs frequently, it is likely to be related to the quality of the equipment. For example, the design of transmission parts may cause the crusher to fail to achieve the actual crushing effect, which may cause material blockage; or the processing capacity of crushing, transfer, screening and other systems is not suitable, which is also prone to material blockage. Therefore, you must choose a regular and powerful manufacturer’s equipment.
Shanvim as a global supplier of crusher wearing parts, we manufacture cone crusher wearing parts for different brands of crushers. We have more than 20 years of history in the field of CRUSHER WEAR PARTS. Since 2010, we have exported to America, Europe, Africa and other countries in the world.
Post time: Aug-19-2022